Licensed & Insured, in Columbus and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Columbus
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (706) 478-2027 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Columbus and surrounding areas · On-site visits included · Free estimate within 24h
Columbus Metal Roofing is a team of local certified professionals based in Columbus. We respond quickly in Columbus and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (706) 478-2027⭐⭐⭐⭐⭐ 4.9/5 · 235 verified Google reviews
“Needed a metal roof on our hay barn out in the rural part of the county and these guys knocked it out in two days. The ribbed panels look sharp and they cleaned up every last screw and scrap piece before they left.”
Commercial & Agricultural Metal Roofing
“The little metal roof over our front porch was leaking right where it meets the brick, and they fixed the flashing and resealed everything in one afternoon. Fair price and they actually showed up when they said they would.”
Metal Roof Repair
“We had them put up a standing seam roof on our equipment shed and I honestly couldn't be happier with how solid it feels. Crew of three, finished in about a day and a half, and the panels are perfectly lined up.”
Commercial & Agricultural Metal Roofing
“After years of shingle headaches we finally switched our brick house over to a metal roof and I wish we'd done it sooner. They walked me through the stone-coated steel options, and the color matches the brick better than I expected.”
Metal Roof Replacement
“Had a leak around the vent pipe on our metal roof that two other folks couldn't seem to figure out. These guys found it, replaced the boot and flashing, and we've been dry through two big storms since. Only reason for four stars is scheduling took a bit longer than quoted.”
Metal Roof Leak Repair
“Beautiful standing seam job on our house, the crew was respectful, kept the yard clean, and the finished roof completely changed the look of the place. Neighbors have already asked me who did it.”
Standing Seam Metal Roofing
“We went with the retrofit over our existing shingles to save some money and I was skeptical at first, but the install went smooth and the house already feels cooler. Took them about three days start to finish and they hauled off all the old debris.”
Metal Roof Over Shingles (Retrofit)
“They installed new gutters matched to our metal roof and added snow guards up top, and the water finally runs where it's supposed to instead of pouring off the edge. Solid work, though I did have to call twice to get the final walkthrough scheduled.”
Gutters for Metal RoofsReal photos of our work in Columbus · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam metal roof | Starting at $8/sq ft | Includes concealed-fastener panels, synthetic underlayment and standard flashing; pitch and roof complexity move the price |
| Exposed fastener panel roof | Starting at $6/sq ft | Corrugated or ribbed panels for shops and barns; panel gauge and trim count affect the final number |
| Metal shingle or stone-coated steel | Starting at $10/sq ft | Includes textured panels and trim; steep pitches and dormers raise labor hours |
| Complex or large-scale job | On estimate | Cut-up rooflines, multiple dormers, tall chimneys and steep pitches need an on-site look before we quote |
| Travel | Included | in Columbus and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, standard residential pitch | From $10/sq ft | Includes panels, concealed clips, underlayment, and standard trim on an accessible roof. |
| Complex roof with dormers and valleys | From $13/sq ft | More cuts, flashing, and trim work raise the per-square rate on cut-up roofs. |
| Heavier 24-gauge panel upgrade | Adds $1 to $2/sq ft | Thicker steel for longer runs and higher wind exposure on open lots. |
| Tear-off of existing shingles | Adds $1 to $3/sq ft | Depends on layer count, deck condition, and dumpster access at the curb. |
| Complex or large-scale job | On estimate | Historic homes, turrets, and multi-roof compounds need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and new corrugated or ribbed panels. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and raised seams; price rises with pitch and flashing complexity. |
| Metal shingle or stone-coated steel replacement | Starting at $12/sq ft | Includes tear-off and new panels; texture and profile choice moves the number. |
| Deck repair and rotten sheathing | On estimate | Priced per sheet after tear-off reveals moisture damage; we document it with photos. |
| Complex or large-scale job | On estimate | Steep historic roofs, multiple chimneys, and limited access need an on-site look first. |
| Estimate | Free | Response within 24 hours at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Direct retrofit over one shingle layer | Starting at $7/sq ft | Includes underlayment, panels, and new flashing; deck repairs and steep pitches raise the rate. |
| Battened retrofit | Starting at $8.50/sq ft | Adds battens for drainage and a thermal gap; best on hot attics and low-pitch roofs. |
| Partial tear-off plus retrofit | On estimate | We strip and repair bad deck sections first, so the scope needs an on-site look. |
| Two-story or cut-up roof | On estimate | Dormers, valleys, and chimney penetrations add flashing labor and access time. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (flashing, screws, single seam) | Starting at $450 | Covers a small flashing rebuild, a screw replacement run, or one seam reseal; height and access move the price. |
| Panel replacement (one to three panels) | Starting at $850 | Includes removal, matched panel, and resealing; steep Historic Northside roofs and tree proximity raise it. |
| Leak diagnosis and repair | Starting at $550 | Includes roof and attic inspection, water test, and the repair; long-running leaks that reached the deck cost more. |
| Storm damage repair with documentation | On estimate | Scope depends on how many panels and fasteners failed; we need an on-site look before quoting. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (fasteners, pipe boot, sealant) | Starting at $450 | Includes diagnostic visit, leak tracing, and permanent fix for a single straightforward entry point. |
| Flashing repair or rebuild | Starting at $650 | Covers chimney, skylight, wall, or pipe boot flashing rebuild with new metal and proper laps. |
| Standing seam or panel section repair | Starting at $850 | Re-crimp or replace damaged panel sections, reseal seams, and verify fasteners in the repair zone. |
| Emergency tarping after storm | Starting at $350 | Same-day temporary weatherproofing to stop active water intrusion until permanent repair is scheduled. |
| Complex or multi-point leak | On estimate | Multiple entry points, steep access, or historic roof details need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (706) 478-2027, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Partial re-fastening (residential) | Starting at $750 | Replaces scattered backed-out or rusted screws with new UV-rated washers on a typical single-story roof. |
| Full roof re-fastening | Starting at $1,450 | Replaces the fastener grid across the panel field, priced by roof size, pitch, and fastener count. |
| Oversized fastener reset | Starting at $950 | Steps up to larger-diameter screws where holes have wallowed or rusted, including hole sealing. |
| Barn, shop, or carport re-fastening | On estimate | Large agricultural and commercial roofs need an on-site look for panel count and access. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple shed or carport | Starting at $5.50/sq ft | Includes panels, fasteners, closures, and basic trim on sound deck with easy access |
| R-panel roof on a low-slope home or shop | Starting at $6.25/sq ft | Includes panel layout, screw schedule for wind, ridge cap, and eave trim |
| Tear-off and replacement of old shingles or panels | Starting at $7.50/sq ft | Adds removal, disposal, and deck inspection; price rises with pitch and roof complexity |
| Retrofit over existing shingles | On estimate | Requires on-site check of layer count, deck condition, and local code limits before pricing |
| Travel | Included | in Columbus and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard ranch | Starting at $9/sq ft | Includes tear-off of one shingle layer, underlayment, metal shingles, and standard flashing. |
| Metal shingle roof, steep or cut-up pitch | Starting at $12/sq ft | Higher labor and rigging for steep Historic Northside or multi-dormer roofs with valleys. |
| Retrofit over existing shingles | Starting at $8/sq ft | Skips tear-off where code allows, but deck condition and layer count must be verified first. |
| Complex or large-scale job | On estimate | Adds dormers, multiple chimneys, rotten decking, or historic review that needs an on-site look. |
| Travel | Included | in Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation | Starting at $9/sq ft | Includes underlayment, panels, and standard flashing; pitch and roof complexity move the rate. |
| Stone-coated steel over existing shingles | Starting at $7/sq ft | Includes a code check on existing layers and new underlayment where the deck qualifies. |
| Full tear-off and replacement | On estimate | Needs an on-site look at deck condition, layers, and access before a number is given. |
| Complex roof with dormers and valleys | On estimate | Steep pitch, multiple valleys, and historic detailing drive labor and flashing cost. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (bay window, porch, dormer) | Starting at $20/sq ft | Includes fabricated copper panels and flashing; access and steep pitch move the price. |
| Full copper or zinc architectural roof | Starting at $28/sq ft | Includes shop drawings, flat-seam or standing seam panels, soldered details and underlayment. |
| Aluminum specialty panels | Starting at $14/sq ft | Includes panels and trim; lower material cost than copper, same fabrication labor. |
| Copper flashing and chimney caps | On estimate | Custom-fabricated to your chimney or valley dimensions; needs an on-site look first. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic clean and single reflective coat | Starting at $2.50/sq ft | Includes pressure wash, spot prime, and one reflective topcoat on sound panels |
| Full restoration with rust treatment | Starting at $3.75/sq ft | Adds rust conversion, seam sealing, and primer on panels with surface corrosion |
| Standing seam color-matched repaint | Starting at $4.50/sq ft | Color match and direct-to-metal paint on standing seam and metal shingle roofs |
| Steep or high-access roof | On estimate | Pitch, height, and tight access around dormers drive the price up |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight re-flash (single unit) | Starting at $600 | Includes curb inspection, new flashing and cap, plus water test; pitch and height move the price |
| Chimney flashing repair | Starting at $850 | Step and counter-flashing bent to the brick profile; chimney width and roof access drive cost |
| Valley or dormer flashing | Starting at $700 | Debris cleared, worn valley metal replaced and edges re-seated; roof complexity is the main factor |
| Multiple penetrations or steep historic roof | On estimate | Several chimneys, skylights or dormers need an on-site look before a firm number is given |
| Travel | Included | in Columbus and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Valley and eave debris barriers | Starting at $1,200 | Covers typical valley and low-eave screening on a single-family metal roof; tree proximity and roof access move the price. |
| Edge metal and closure re-securement | Starting at $1,450 | Includes reinforced eave and rake trim with sealed closures; panel profile and trim length affect the final figure. |
| Ridge and fastener re-securement | Starting at $1,600 | Re-torques and replaces backed-out screws and lifted ridge caps; roof height and panel count drive the cost. |
| Limited snow guard installation | On estimate | Rarely needed in Columbus; quoted on site because steep historic roofs and overhangs change the hardware and labor. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, fastener, and attic check with photos, no obligation to book work. |
| Minor repair (panel, flashing, fasteners) | Starting at $350 | Covers isolated panel replacement, flashing re-seal, or a small run of walked screws. |
| Multi-panel or multi-slope repair | Starting at $900 | Price moves with panel count, roof pitch, access, and whether decking underneath is wet. |
| Screw replacement and re-fastening | On estimate | Priced per square and per fastener count after we walk the full slope on site. |
| Full replacement after major damage | On estimate | Needs an on-site look at panel type, decking condition, and insurance scope before a number. |
| Estimate and claim documentation | Free | Photo set organized for adjusters, response within 24h at (706) 478-2027. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free initial estimate | Free estimate | On-site look at the roof, verbal findings and a written quote for any recommended work. |
| Standard maintenance inspection | Starting at $150 | Full walk inspection with photo report; price moves with roof size and access difficulty. |
| Pre-sale or insurance documentation inspection | Starting at $250 | Detailed written report with photos and measurements; steeper or multi-level roofs cost more. |
| Steep or historic roof inspection | On estimate | Ladder and roof-edge access for steep Victorian or Italianate roofs needs an on-site look first. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (706) 478-2027, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter run, standard 5-inch | Starting at $9/linear ft | Includes on-site forming, hidden hangers, end caps, and sealed joints on an accessible single-story eave. |
| 6-inch high-volume trough with extra downspouts | Starting at $14/linear ft | Sized for steep or large metal roof planes, includes additional outlets and splash blocks at discharge. |
| Needle-rated gutter guards | Starting at $6/linear ft | Fine mesh or reverse-curve guard for pine needle and magnolia leaf load on shaded Columbus lots. |
| Standing seam clamp hangers | Starting at $12/linear ft | Non-penetrating seam clamps for standing seam panels, priced by run length and seam spacing. |
| Complex or large-scale job | On estimate | Steep multi-story roofs, buried downspout runs, and tight landscaping need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (706) 478-2027, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn, pole shed or carport re-roof | Free estimate | Written scope with panel profile, gauge and fasteners; square footage and access drive the price. |
| Commercial standing seam installation | Starting at $12,000 | Concealed-fastener system with underlayment and flashing; roof size and height move the number. |
| Re-fastening and leak repair | Starting at $850 | Oversized screws, new washers and re-flashing; number of penetrations and panel condition set the cost. |
| Insulated panel system | On estimate | Insulation and condensation control sized to the building; needs an on-site look at purlin spacing. |
| Travel | Included | In Columbus and surrounding counties, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (706) 478-2027, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Columbus want a crew that knows the local housing stock, not a call center. Columbus Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofs across the Chattahoochee River valley. We work on the steep pitches of Historic Northside, the brick ranches of the east side, the mill cottages of Bibb City, and the large shingle roofs of Green Island Hills, plus farm buildings out toward Cusseta, Hamilton, Waverly Hall, and Pine Mountain.
That range matters because Columbus roofs face heavy pine and oak canopy, strong summer sun, and afternoon thunderstorms that drive water sideways. Many homes also carry aging exposed-fastener roofs whose screws and washers are reaching the end of their service life. Whether you need a Metal Roof Inspection or a full replacement, we give you a straight answer about what your roof actually needs.
Most metal roof leaks in Columbus do not come from the panels themselves. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal fails, water slips past the screw head and travels along the purlins and decking, often showing up as a ceiling stain far from the actual entry point. Ignoring it leads to rotted sheathing and wet insulation. Other common sources include seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys. Wind-lifted panels after a storm and punctures from fallen limbs are also frequent calls.
Our Metal Roof Leak Repair service starts with finding the true source, not just caulking the stain. We check fastener torque and washer condition, probe seams and closures, and inspect every penetration. In many cases, a full screw replacement and re-fastening restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right call versus when the panels or decking are too far gone.
If water is already inside, call (706) 478-2027 and we will schedule a look. You can also request a free estimate and we will walk the roof, document the failures, and give you an honest repair-versus-replace recommendation.
We install the full range of metal systems, and we match the system to the home rather than pushing one product. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, which makes it the premium choice for remodels and porches. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, shops, and carports. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. A Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound; when it is not, tear-off is the right call.
Metal roof work is quoted by the square foot for installations and often as a flat rate for repairs. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of how we price, see our pricing page, then request a free estimate or free roof inspection so we can measure your roof and give you a real number.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We never suggest a deductible could be waived, absorbed, or paid by the contractor.
On permits: in most jurisdictions, a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection rules differ. Historic district or HOA design review can also affect panel profile and color. Requirements vary, always verify with the Columbus building or planning department before starting your project. You can also contact us with questions about documentation.
Ready to get started? Columbus Metal Roofing serves in Columbus and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Columbus · Response within 24h · No commitment · ☎ (706) 478-2027
Your Free Quote Request